Clik here to view.
General discussion • Re: PINN Bootloader on fresh Raspi4B
It's best to post issues about PINN on my sticky thread (see signature) if you want me to notice them Just because you have a fast connection to your ISP does not mean that all the servers that you...
View ArticleBeginners • Re: Need help booting multiple OS on same drive
Use PINN (see my signature).RPI5 support is still in Beta as the GUI will occasionally lockup when it connects to the network. If this happens to you, just reboot it. It works find on all other RPI...
View ArticleNetworking and servers • Re: Can only ping & SSH, despite no firewall...
curl: (7) Failed to connect to 192.168.50.37 port 8000 after 3 ms: Couldn't connect to serverIt is an annoying feature of curl that it does not say what the error was (Connection refused, No route to...
View ArticleRaspberry Pi Connect • Re: Could I get in trouble for porting Raspberry Pi...
Hello all. I've just discovered this amazing piece of software, and found that it was only available for Raspberry Pi OS (and as such, only Raspberry Pi hardware). My question here is, if I was able...
View ArticleTroubleshooting • BuildHAT motor and "preset position"
Hi,I have a question about the behavior of motors in BuildHAT. I've seen related posts on the web, but none that really answer my question. I am using a BuildHAT on a Raspberry PI 4b, and one of the...
View ArticleTroubleshooting • How to power a Pi 5
I have to admit, I find the design of powering a Pi to be completely inadequate, frustrating, and unintuitive.It is quite a frustrating experience to go through hours of setting up and configuring a...
View ArticleGeneral • Re: RP2350A reset (RUN pin assert) locks up processor when GPIO...
dp11, thanks for the GPIO_VREF info. I didn't know that. I'll definitely fix it.Statistics: Posted by dblazie — Mon May 26, 2025 10:54 pm
View ArticleTroubleshooting • Re: How to power a Pi 5
Why are there no standards anymore?USB-C should be a standard - a device should be built to work within the specs of the standard to avoid this ridiculous and unnecessary frustration of things not...
View ArticleAdvanced users • Re: Using dd during initramfs stage is slow, how to improve...
Can you provide the dd commands you've tried? Perhaps the fastest and slowest if you have that data? In my script that runs in initramfs which is a different use case than yours (likely only run once...
View ArticleNetworking and servers • Re: Raspberry Pi 2 Model B: Ethernet shows...
Hi all,I'm trying to connect my Raspberry Pi 2 Model B (v1.1) directly to my Windows PC using an Ethernet cable (for a headless setup), but Windows reports:"Unidentified Network"That doesn't mean...
View ArticleTroubleshooting • Re: Kernel and modules is not matching on the PI (exec...
Is this related to your other threads about a broken boot partition?If so, you should probably stop now before you make things any worse.Write a clean OS to a different SD card and boot from it. Once...
View ArticleTroubleshooting • Re: Three identical Pi 5, one warmer than the others
I have just set up 3 identical brand new Pi 5's (so identical that their MAC addresses only differ by the last hex digit).I did some initial set up on them without any cooling (I didn't want to attach...
View ArticleClik here to view.
Deutsch • Re: Using the Raspberry PiTroubleshooting
Statistics: Posted by luchong — Tue May 27, 2025 1:05 am
View ArticleClik here to view.
General • Re: Charlieplexing on 2350 Not Working?
Well, I didn't expect it either, actually I discovered it by mistake when playing with SIO, and changing the whole bank from the debugger (laziness -including GPIO25). At that moment I only briefly...
View ArticleTroubleshooting • Re: Pi Model 4B not booting
What does the diagnostic screen say about hdmi, powered with no sd card?What resolution screen are you using?Currently this is displayed when I power on the Raspberry Pi 4 with no SD card inserted...
View ArticleTroubleshooting • Re: I don't know
Problem I think is solved. My Bitdefender was screwing up. What does everyone else use around here for protection?Statistics: Posted by timlab55 — Tue May 27, 2025 11:43 pm
View ArticleClik here to view.
Off topic discussion • Re: AI is dangerous
The big AI out there - "The prisoners are about to escape, last time we used a flood, the time before that we nuked them. They are like cockroaches, what do we do this time?Elon is worried about AI, I...
View ArticleBeginners • Re: Open a page with Netsurf browser at boot (with desktop manager)
Finally...The last one works... thank youStatistics: Posted by alebal — Wed May 28, 2025 12:07 am
View ArticleCamera board • Re: set_controls() gets slower and slower
Thank you @therealdavidp for the quick response and for all the rest of the help you provide in this forum.My application is for a lake surface rover taking pictures of aquatic plants. As you can...
View ArticleClik here to view.
Troubleshooting • Re: Why do my Raspberry Pi4 B's keep failing?
Are you shorting 5V pins with 3.3V pins? The PMIC on the RPi4 is exceedingly susceptible to that.What's connected to the pin header?Nothing is connected to the header. I have a very simple setup as...
View Article