Troubleshooting • Re: trying to run python program full screen on 1024x600...
Thanks for the update, helps me to understand how to find this kind of problem.Regards,GregStatistics: Posted by JalopiGreg — Thu Apr 17, 2025 5:43 pm
View ArticleSDK • Re: In code detect if running on Pico or PicoW
I am just speculating. Perhaps looking at the output of these two commands might show different hardware information? Easy to confirm in 2 minutes. /proc/cpuinfocat /proc/versionIn normal debian base...
View ArticleOther projects • Re: Outdoor robot - GPIO SPI connection to a MCP4251 (num-pot)
Perhaps the first rule is to confirm that posted URL links really works: Your link returns a http 404 error at least from where I am.Statistics: Posted by Henderson Hood — Thu Apr 17, 2025 5:48 pm
View ArticleCamera board • Re: No cameras available on raspberry pi 4 with camera module 3
You could try settingcamera_auto_detect=0and addingdtoverlay=imx708to the bottom of the config file and run dmesg after a rebootIf dmesg mentions that it fails to read from the camera there may be...
View ArticleHATs and other add-ons • Waveshare 3.5 inch SPI display - touch isn't working
I have this Waveshare display: https://www.waveshare.com/3.5inch-Capac ... ch-LCD.htmI have it connected to a Pi Zero 2 running Raspberry Pi OS Lite, Bullseye 32 bit. I finally got the screen to work...
View ArticleGeneral discussion • Re: Raspberry PI 5, Short Circuit 3.3V and GND! Need...
No! I've disconnected everything but there's still a short circuit on the board.I forgot to mention it!When using my Raspberry PI 5 The only things that work are:- I can write EEPROM and it shows...
View ArticleAdvanced users • Re: Use a random IPv6 interface ID?
Suggest checking the system logs for NetworkManager errors when making conf file changes. Easier to have NM tell you what it did (or failed to do) is quite simple, since NM is very good about logging...
View ArticleTroubleshooting • Re: CM5 not booting anymore, bootloader cannot be reset
Your boot order now is 0xf21? Why did you change it?Anyhow, your Pi tries network, if that fails it tries uSD, so if there is a bootable OS it should boot.What happens if you press and hold SHIFT key...
View ArticleTroubleshooting • Re: Desktop (KDE Plasma) non responsive after switching...
it's an issue with some screens, i'd say about 25% of screens i've tried had to tell it the settingsStatistics: Posted by kerry_s — Fri Apr 18, 2025 5:12 pm
View ArticleGeneral discussion • Re: Raspberry Pi 4 Freezes During APT Update
The recommended udate/upgrade mantra is:Code: sudo apt updatesudo apt full-upgradeThere are two differences to your mantra:apt instead of apt-get is optimised for interactive use, and may give more...
View ArticleGraphics, sound and multimedia • Re: How to open rpicam-raw produced .raw files?
And in my opinion there HAS to be a way to use the files which are obtained with rpicam-raw.Or does this command simply only produce useless trash? Whats the meaning of this command then?You are using...
View ArticleOther • Re: What happened to Armbian ?
brltty is a thing that Debian installs but does not configure in a misguided attempt at providing accessibility*. It's always fun finding ways to kill it on a new Debian installation.On the Raspberry...
View ArticleMicroPython • Re: MicroPython file system corruption
No, same issue.Discord isn't owned by Microsoft. You can create a per-instance persona if you can't be identified.And trust me, there are lots of "merely a user complaining" on Discord ...Statistics:...
View ArticleBeginners • Re: How can i know if the PCIe and the NVMe are really running?
First and simplest thing to check is the cable. I’ve had problems recently with it slipping out of the socket.Statistics: Posted by timrowledge — Fri Apr 18, 2025 5:57 pm
View ArticleGeneral discussion • Re: STICKY: PINN - An enhanced version of NOOBS.
I was wondering if anyone had had this issue and if so how to resolve it. I have a Pi5, and have installed PINN, and multiple OS onto an M.2 NVME drive and all was working great.I messed something up...
View ArticleMedia centres • Peppy Player Klee, 7" display
I have taken a perfectly good peppy player running the Marc edition and turned it into a brick by upgrading to Klee. First I tried to upgrade in place without removing the SD card. Nothing was...
View ArticleTroubleshooting • Re: Argon1 V5 NMVe problem
Problem solved.Changed the boot order in raspi-config (nmve first) and did a network install.Statistics: Posted by BogoMax — Sat Apr 19, 2025 3:44 pm
View ArticleTroubleshooting • Re: Pi + Touch Screen 1 + 5V5A power supply cant deliver 5V5A?
hi alli have a Pi 5 with the Pi touch screen (v1) using the official 5V5A Pi power supply and when the OS loads I get a message saying this power supply is not capable of delivering 5V at 5A. I have...
View ArticleBeginners • MQTT publish fomatted sensor reading
I have a dsb18b20 working just fine, publishing OK to MQTT.But, I don't need three decimal places when 1 would be just fine.I've formatted the reading OK, but on publish it saysTypeError: 'str' object...
View ArticleMedia centres • Re: Peppy Player Klee, 7" display
The Peppy Player dev wants queries to be posted in the dedicated Peppy Player thread.Statistics: Posted by trejan — Sat Apr 19, 2025 4:14 pm
View Article