Clik here to view.
Beginners • Re: Best Raspberry Pi for Everyday Use?
I too suggest a RPi5 8GB - this should be more than is needed at the moment, but you will 'grow into it'.... (Whilst a RPi500 may sound good at first, you will likely want to add various 'hats' at a...
View ArticleAutomation, sensing and robotics • Re: Power Supply and Buck Converters ?
Definitely need separate buck convertors. However since you are using them for the Pi and the servos look at a slightly higher PSU, i.e. 12V nominal at 50-ish Amps. Several of these are around used...
View ArticlePython • Re: The intallation for python open cv wont work
Are you running "Bookworm" on that Pi3?What error messages did you see? hi sorry for the late respond and this is the type of error that shows up externally-managed-environmenterror: This environment...
View ArticleOther RP2040 boards • Re: RP2350 L1 inductor orientation - confusing
All this confusion is one of the reasons I'm using an LDO to generate DVDD (1.1V). Plus it is quite a bit cheaper than the dragon's tooth Abracon part.I fully agree! I saw that using an LDO works for...
View ArticleClik here to view.
Advanced users • Re: Custom Display Resolution
It works!!!!Thanks a lot! Statistics: Posted by Smntk — Sat Mar 08, 2025 9:54 am
View ArticleMicroPython • Re: Raspberry Pi Pico WH main.py
I made a syntax error, which I discovered when I went through Mike's code.I disabled the sync_time rtc = RTC()connect_wifi() # Connect to Wi-Fi# sync_time_with_ip_geolocation_api(rtc) # Sync time from...
View ArticleGeneral discussion • Re: Webcam Streaing
Have a look at mediamtxStatistics: Posted by neilgl — Sat Mar 08, 2025 10:05 am
View ArticleFrançais • Re: Permission denied
Bonjour,Je vais un peu plus détailler par rapport à mes tests.Le lsblk donne ça:Code: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTSmmcblk0 179:0 0 119.1G 0 disk├─mmcblk0p1 179:1 0 512M 0 part...
View ArticleAdvanced users • Re: RPi 3B w/Bookworm + non-standard display
I'm definitely not certain, but I'm beginning to wonder if it could be a driver issue with interpretation of the EDID. The EDID design has a section of supported timings called Standard Timings (and...
View ArticleRaspberry Pi OS • Re: Chromium updates
I use manjaro on an RPI5.On manjaro-arm, chromium is 'stuck' at v131. There seems to be a problem with the mesa package, which causes issues with 3D rendering, for example with google maps and webgl...
View ArticleOther • Re: Alpine Linux
I have tried installing Alpine on my Pi 5 but it is a hassle man. I mean getting to the command line is the easy part. I tried to install a desktop environment but failed. I have tried to avoid any...
View ArticleClik here to view.
Troubleshooting • Raspberry as Wifi Hotspot with NordVPN
Hi!Linux raspberrypi 6.6.74+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.74-1+rpt1 (2025-01-27) aarch64Good to be back Why would I do this? Well to be able to use VPN on an appliance where you cannot...
View ArticleOther programming languages • Re: Basic on Raspberry
cct, there are several versions FB in your repository. Which one is for Windows ARM64?Your archives only contain a compiler. I did not find a code editor and debugger in them.Statistics: Posted by...
View ArticleClik here to view.
Interfacing (DSI, CSI, I2C, etc.) • Re: dummy-csi-sensor on CM5
The driver was simply not being included in the build. Added it via "make menuconfig", and now it loads fine.Statistics: Posted by Micke — Sun Mar 09, 2025 10:04 am
View ArticleTroubleshooting • Re: Update broke multi-monitor support in Sway
Github issue posted hereStatistics: Posted by dom — Sun Mar 09, 2025 10:36 am
View ArticleClik here to view.
Compute Module • Re: CM4 does not boot(?) on a custom carrier
Common advice to CM users: start from https://datasheets.raspberrypi.com/cm4i ... -KiCAD.zip by removing the HW you don't need, then add what you want.your pinout is a CM5, so what are you aiming for?...
View ArticleClik here to view.
Camera board • Re: GScrop Question
Fortunately, I was able to identify the problem. In my case, the GScam designation is not ‘imx296 10-001a’ but ‘imx296 4-001a’.Hi,for me i2c-4 and i2c-6 are only links to i2c-10 and i2c-11:Code:...
View ArticleGraphics, sound and multimedia • Re: USB DAC outputs sound, but cannot adjust...
Hi guys,Just surfacing this one again, anyone have any ideas on this?What software are you using to control the audio playback ?Statistics: Posted by Man in a van — Sun Mar 09, 2025 10:44 am
View ArticleTroubleshooting • Re: Replacing SD for HDD, HDD errors on boot
That's a drive used for storage, also self charged. That one is mounted on fstab.I've tried booting with it disconnected as well, no dice.What I haven't tried was booting without the SD, since it...
View ArticleOther • Re: Win 11 on Pi5
and MS are still releasing ARM64 updates to Win 11, so they are still supporting it.Statistics: Posted by mike-p — Mon Mar 10, 2025 10:02 am
View Article