Beginners • Re: Raspberry pie 5 and light sensor through a multiplexer
veml7700 (https://www.vishay.com/docs/84286/veml7700.pdf) is connected to which devices? sure, it will have to be an I2C multiplexer but TCAA is to cryptic. so: which multiplexer do we speak of? how...
View ArticleGeneral discussion • Re: Rpi4b overclock settings
there is no 'max value' because of silicon lottery!you will have to test your particular Pi to See If it's stable at the selected frequency.Statistics: Posted by aBUGSworstnightmare — Fri Jun 20, 2025...
View ArticleGeneral • Re: Strange behavior with debugger since SDK V2
No, I don't use PICO_CXX_ENABLE_EXCEPTIONS. But the behaviour is exactly the same...- changes and (incremental) build aren't visible on the device after flashing (e.g. adding a printf in the main loop...
View ArticleOther projects • Re: 3 button and 3 LED for Tricorder
If there's room in the case ... You need room in the case for the expander wand the wires from it to buttons and LEDs.There's some room, don't think I can get a second 18650 power pack, but 1 or 2...
View ArticleTroubleshooting • Re: Having issues getting bluetooth audio working
Also just decided to try the onboard bluetooth again.Fresh install of Raspberry Pi OS Lite on thumb driveNo dongles attachedCode: alturick@doomsday:~ $ sudo bluetoothctlAgent registered[CHG]...
View ArticleBeta testing • Re: wayland, wayland-protocols, libliftoff
I said in my previous message that this procedure executed under Trixie creates a beta.list file that links to bookworm instead of trixie.The source code I'm referring to...
View ArticleClik here to view.
Compute Module • Re: CM4 and correct selection of packages for current...
Hi again!It took me a quite a while to do my best to understand most of the topics involved, but here I am with updated results following your indications.I should mention that the official guide...
View ArticleHATs and other add-ons • Re: Raspberry Pi 5 Case
A KKSB with HAT installed viewtopic.php?p=2233478&hilit=KKSB#p2233478Not a recommendation when using the Pi at heavy loads as the case has a poor thermal performance!Statistics: Posted by...
View ArticleTroubleshooting • Re: No response from top 1/5 of the touch screen
Hi,I am using Raspberry Pi 4 with a 7" touch screen that comes with Smart Pi Touch. The device name of the touch screen from running "xinput list" is "10-0038 generic ft5x06 (79)".When running evtest,...
View ArticleTroubleshooting • Re: Raspberry Pi 3a/Bookworm + Lo-tech VGA HAT woes
which OS do you use? you're config options are legacy and will be ignored by the KMS driver (which IS Default in bookwork).as you're screen in non working when running legacy graphics driver - which...
View ArticleTroubleshooting • Re: Mouse/Keyboard input broken on raspberry pi 5
the Firmware checks on power-on If a fan is connected - it enables PWM and checks If the tach-input is there. If yes it enables the kernel driver which runs the PWM under temp control (with a default...
View ArticleMicroPython • Re: Lcd 1602 issue
Then use one which works at 3.3V.They are surprisingly hard to find. Most of the backpack type ones require 5V, but are likely 3.3V logic safeStatistics: Posted by scruss — Sun Jun 22, 2025 12:13 am
View ArticleClik here to view.
Troubleshooting • Re: M.2 NVMe Disk preformance question (RPI-5 16gig)
those are pretty much the numbers i would expecti just turned on gen3 this mourningStatistics: Posted by kerry_s — Sun Jun 22, 2025 12:26 am
View ArticleGeneral • Re: SIO Module Design
It's kind of a vain question.Statistics: Posted by dthacher — Sun Jun 22, 2025 12:33 am
View ArticleGraphics, sound and multimedia • Re: Midi, I2C, Pi 5 RP1 chip, which gpio lib???
Still I'm not sure if Os overlays take over and fluctuates the clock, need to learn this part way better to deal with it...Yes overlays can fix the clock, so playing with clock dividers directly won't...
View ArticleBeginners • Having trouble with byobu-enable
Hello,I enjoy using `byobu` for screen/tmux purposes. I installed it via apt the usual way. Usually, after I do "byobu-enable", every terminal I open will have byobu already running. However on...
View ArticleTroubleshooting • Re: Broken USB port, gives error -74, what do I do?
It's probably not my keyboard because it works well on my computer, and it also shows lights when it has energy, but the Raspberry Pi doesn't seem to conduct any to it, since it doesn't turn on, if I...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Hardware PWM does not work on Pi 5...
Thank you for your useful information!Statistics: Posted by neuralassembly — Sun Jun 22, 2025 3:35 am
View ArticleClik here to view.
General programming discussion • Re: 'Best' language for user Services
Assuming you don't buy an rpi with more ram..A valid assumption! I do have a 4 GB Pi 4, which I use for development, but my home control stuff has been running (with occasional added functionalities)...
View ArticleCamera board • Re: IMX708 4-Lane Operation
and their Amazon store has the 22pin version (again different in the pics)I bought this one and received the 22pin version back in JanuaryStatistics: Posted by peytonicmaster — Sun Jun 22, 2025 3:51 am
View Article