Maybe i have confused people.
two pi 5.
One working
One not.
PI 5 No.1 working.
PI 5
Waveshare 2-Ch PCIe FFC Adapter Board For Raspberry Pi 5, Expands 2-Ch PCIe FFC Connectors, Supports Stacking Multiple PCIe HATs, Raspberry Pi 5 PCIe HAT
PCIe 1 attached Geekworm X1001 M.2 KEY-M NVMe SSD Shield for Raspberry Pi 5
PCIe 2 attached Penta SATA HAT
This works.. I can boot from the NVMe drive and see 5 SATA SSD.
All good.
PI 5 No.2 Not working.
PI 5
"Waveshare 2-Ch PCIe FFC Adapter Board For Raspberry Pi 5, Expands 2-Ch PCIe FFC Connectors, Supports Stacking Multiple PCIe HATs, Raspberry Pi 5 PCIe HAT"
"PCIe 1 attached Geekworm X1001 M.2 KEY-M NVMe SSD Shield for Raspberry Pi 5"
"Waveshare PCIE TO 4-CH NVME Board"
Now if I connect the "Geekworm NVMe Hat" to PCI port 1. it will boot.
If I plug the "Waveshare PCIE TO 4-CH NVME Board" connect to PI 5 pcie port and move the boot nvme to the waveshare. it will boot.
But if I plug both into the "Waveshare 2-Ch PCIe FFC Adapter Board For Raspberry Pi 5, Expands 2-Ch PCIe FFC Connectors, Supports Stacking Multiple PCIe HATs, Raspberry Pi 5 PCIe HAT" nothing.
These are almost the same one is a SATA SSD carrier board the other is a NVMe carrier board.
Both use the same ASMedia Technology Inc. ASM1182e pcie switch.
two pi 5.
One working
One not.
PI 5 No.1 working.
PI 5
Waveshare 2-Ch PCIe FFC Adapter Board For Raspberry Pi 5, Expands 2-Ch PCIe FFC Connectors, Supports Stacking Multiple PCIe HATs, Raspberry Pi 5 PCIe HAT
PCIe 1 attached Geekworm X1001 M.2 KEY-M NVMe SSD Shield for Raspberry Pi 5
PCIe 2 attached Penta SATA HAT
This works.. I can boot from the NVMe drive and see 5 SATA SSD.
All good.
PI 5 No.2 Not working.
PI 5
"Waveshare 2-Ch PCIe FFC Adapter Board For Raspberry Pi 5, Expands 2-Ch PCIe FFC Connectors, Supports Stacking Multiple PCIe HATs, Raspberry Pi 5 PCIe HAT"
"PCIe 1 attached Geekworm X1001 M.2 KEY-M NVMe SSD Shield for Raspberry Pi 5"
"Waveshare PCIE TO 4-CH NVME Board"
Now if I connect the "Geekworm NVMe Hat" to PCI port 1. it will boot.
If I plug the "Waveshare PCIE TO 4-CH NVME Board" connect to PI 5 pcie port and move the boot nvme to the waveshare. it will boot.
But if I plug both into the "Waveshare 2-Ch PCIe FFC Adapter Board For Raspberry Pi 5, Expands 2-Ch PCIe FFC Connectors, Supports Stacking Multiple PCIe HATs, Raspberry Pi 5 PCIe HAT" nothing.
These are almost the same one is a SATA SSD carrier board the other is a NVMe carrier board.
Both use the same ASMedia Technology Inc. ASM1182e pcie switch.
Statistics: Posted by malar67 — Sat Aug 09, 2025 2:19 pm