The "display:" line shows working hotplug (HPD) and EDID (they are the two most common issues with a faulty display or hdmi cable).Thanks, man its worked, i have used it but without D.
What was the issue with D.
Why config.txt setting not working.
Also , what display line tells exactly on diagnosis screen.
However if it works with "video=HDMI-A-1:1920x1080M@60D" it suggests you still have a problem.
If you remove that line, connect in, and post the output of:we can see what mode it was choosing based on the provided EDID.Code:
raspinfo | pastebinit
after removing line from cmdline.txt
output as you requested.
https://pastebin.com/wTx4Eauc
Statistics: Posted by balram_rexwal — Wed Jul 30, 2025 2:06 pm