HATs and other add-ons • Re: Anyone using Geeek X1001 M.2 hat?

Code:

pi@Pi5-SN530:~ $ cat /sys/class/hwmon/hwmon*/namecpu_thermalnvmepwmfanrp1_adcrpi_voltpi@Pi5-SN530:~ $ grep -l "nvme" /sys/class/hwmon/hwmon*/name/sys/class/hwmon/hwmon1/namepi@Pi5-SN530:~ $ cat /sys/class/hwmon/hwmon1/temp1_input35850pi@Pi5-SN530:~ $ cat /sys/class/hwmon/hwmon1/device/modelWDC PC SN530 SDBPMPZ-256G-1101          pi@Pi5-SN530:~ $ sudo nvme --smart-log /dev/nvme0n1 -HSmart Log for NVME device:nvme0n1 namespace-id:ffffffffcritical_warning: 0      Available Spare[0]             : 0      Temp. Threshold[1]             : 0      NVM subsystem Reliability[2]   : 0      Read-only[3]                   : 0      Volatile mem. backup failed[4] : 0      Persistent Mem. RO[5]          : 0temperature: 35°C (308 Kelvin)available_spare: 100%available_spare_threshold: 10%percentage_used: 0%endurance group critical warning summary: 0Data Units Read: 1,628,769 (833.93 GB)Data Units Written: 838,267 (429.19 GB)host_read_commands: 20,579,915host_write_commands: 4,583,491controller_busy_time: 55power_cycles: 666power_on_hours: 125unsafe_shutdowns: 34media_errors: 0num_err_log_entries: 1Warning Temperature Time: 0Critical Composite Temperature Time: 0Thermal Management T1 Trans Count: 0Thermal Management T2 Trans Count: 0Thermal Management T1 Total Time: 0Thermal Management T2 Total Time: 0

Code:

pi@Pi5-SN530:~ $ sensorsrpi_volt-isa-0000Adapter: ISA adapterin0:              N/A  pwmfan-isa-0000Adapter: ISA adapterfan1:        3467 RPMcpu_thermal-virtual-0Adapter: Virtual devicetemp1:        +38.0°C  rp1_adc-isa-0000Adapter: ISA adapterin1:         952.00 mV in2:           2.52 V  in3:           1.39 V  in4:           1.41 V  temp1:        +42.1°C  nvme-pci-0100Adapter: PCI adapterComposite:    +34.9°C  (low  =  -5.2°C, high = +79.8°C)                       (crit = +84.8°C)